Photos: Sperry

Sperry · Footwear

Sammi Deconstructed Boat Shoe

$145View listing

Identified as
Boat shoe · Footwear
A kind of
Moccasin, a kind of Footwear
Reference
Sperry Authentic Original 2-Eye Boat Shoe, 1935 · The originator, still made
Materials
Not stated · No fibre composition in the listing

Sperry's boat shoe, patterned on the Sperry Sperry Top-Sider of 1935. It keeps the siped non-marking rubber sole, 360-degree rawhide lacing and two- or three-eyelet front; the oiled or water-resistant leather upper and low profile, flat heel differ from the Sperry Top-Sider: a suede upper and a separate raised heel; the sole construction, outsole, unlined upper and hand-sewn moccasin toe cannot be made out. The listing says nothing about construction and does not say where it is made.

Reference · the Sperry Sperry Top-Sider

Sperry Authentic Original 2-Eye Boat Shoe in smooth brown leather with tan rawhide laces and a white siped sole, three-quarter front view, no model

The boat shoe was the Top-Sider, a siped rubber-soled deck shoe made by Paul A. Sperry in Connecticut from 1935. Paul Sperry, a sailor on Long Island Sound, looked for a sole that would grip a wet deck after a fall overboard. He noticed his dog's ability to run over ice without slipping and cut fine slits (siping) into rubber soles in 1935, which became the Top-Sider. He applied for a US patent on the sole in 1937 (US 2,206,860, 'Shoe'). A rubber company he first approached turned him down, and Converse Rubber agreed to make blank soles that Sperry siped and assembled. In 1939 the War Department named the shoe an official Navy shoe, and in 1940 Sperry sold his business to the United States Rubber Company, which sold it nationwide.

Still made by Sperry as the Authentic Original 2-Eye Boat Shoe · photo: Sperry

How the Boat shoe changed, 1935-1940 to present
  1. 1935–1940Paul Sperry cuts siping into a rubber sole in 1935 after watching his dog on ice, has Converse make blank soles for him to slit, and launches the Top-Sider the same year. He applies for a US patent on the slit sole on 30 November 1937; it is granted on 9 July 1940 as US 2,206,860. Sperry's own history says he patented the sole in 1939, and the sources also differ on the Navy and the sale: Sperry's site says the Navy made the Top-Sider standard issue for its casual uniform in 1940, Connecticut History says the Navy contracted for the right to make the shoes in 1939 and the United States Rubber Company bought the business the same year, and Monagan's account via Wikipedia puts the sale to US Rubber in 1940.
  2. 1940s–1970sTop-Siders become popular in the late 1940s once wartime restrictions on leather and rubber end, and attach themselves to the East Coast college look of the 1950s; legend has John F. Kennedy wearing them in the Navy and on Cape Cod. Sebago of Westbrook, Maine, a hand-sewn loafer maker since 1946, introduces its Docksides boat shoe in 1970 (its late president's obituary says 1972), the second long-running model. In 1979 Stride Rite buys Sperry Top-Sider from Uniroyal, the renamed US Rubber, for $5.7 million.
  3. 1980sThe Official Preppy Handbook (October 1980) calls Top-Siders "the automatic choice with khakis" and puts a pair on its cover; Sebago's history says the book listed Docksides and its penny loafers as must-haves. Sperry's sales grow 80 percent in 1982, a rate Footwear News called unmatched in the shoe industry, and the shoe is worn far from any water. The success was, in Stride Rite's own telling, unplanned, and the downturn that followed the fad was too.
  4. 2000s–presentSperry passes with Stride Rite to Payless ShoeSource (2007, renamed Collective Brands), to Wolverine World Wide (October 2012) and to Authentic Brands Group with the Aldo Group as operating partner (January 2024); Sebago goes from Wolverine to Italy's BasicNet (2017). Boat shoes return as a fashion item in the late 2000s and again in the mid-2020s, when Sperry brings in a guest creative director (Chris Echevarria, 2023) and J.Crew, Aritzia, Todd Snyder and BEAMS sell collaborations on the Authentic Original. Maine hand-sewers (Rancourt & Co., Quoddy) sell the shoe at a premium with the siped sole, unlined uppers and rawhide lacing intact, while cheaper versions use machine-stitched aprons, decorative side laces and unsiped or lug soles.
  1. Oiled or water-resistant leather upperDiffers

    The Sperry Sperry Top-Sider has a smooth or oiled leather upper; this product has a suede upper.

    A full-grain leather upper, oiled, waxed or otherwise treated to shed salt water and dry without stiffening; nubuck and suede versions are sold by every maker in the record. Sperry's original was canvas, and canvas remains the other traditional upper.

    No clear view
    Sperry Sperry Top-Sider
    No clear view
    This product
  2. Sole constructionUnclear

    The listing does not say, and the sole construction cannot be made out.

    How the sole is joined to the upper, which decides whether it can be resoled.

    Cannot be confirmed from the listing text; check in person.

    No clear view
    Sperry Sperry Top-Sider
    No clear view
    This product
  3. OutsoleUnclear

    The listing does not say, and the outsole cannot be made out.

    The sole that meets the ground: its material and tread.

    Cannot be confirmed from the listing text; check in person.

    No clear view
    Sperry Sperry Top-Sider
    No clear view
    This product
  4. Unlined upperUnclear

    The listing does not say, and the unlined upper cannot be made out.

    The upper is left unlined (often with only a leather sock liner), so the shoe dries quickly, can be worn without socks and moulds to the foot. Rancourt, Quoddy and Sebago all state it; Sperry's Made in Maine version adds a lambskin lining.

    No clear view
    Sperry Sperry Top-Sider
    No clear view
    This product
  5. Hand-sewn moccasin toeUnclear

    The listing does not say, and the hand-sewn moccasin toe cannot be made out.

    The upper wraps under the foot and is closed on top by a vamp (apron) panel sewn on with a raised seam around the toe. On the Sperry Authentic Original, Sebago's Docksides and the Maine hand-sewers (Rancourt, Quoddy) the vamp seam is sewn by hand with waxed thread; Sperry describes the shoe as "handsewn" with "traditional moccasin construction".

    No clear view
    Sperry Sperry Top-Sider
    Hand-sewn moccasin toe on this product, as the listing shows it
    This product · photo: Sperry
  6. Siped non-marking rubber soleSame

    The Sperry Sperry Top-Sider and this product both have a flat siped rubber sole.

    A flat rubber sole cut with fine wavy or herringbone slits that open under weight and squeeze water out from under the foot, so the sole holds a wet deck. White or gum and non-marking so it does not scuff a boat's deck; Sperry's patent of 1937 claims "an outsole of elastic cushion rubber having a tread surface provided with a multiplicity of slits". Sperry calls its current version razor-cut Wave-Siping.

    No clear view
    Sperry Sperry Top-Sider
    Siped non-marking rubber sole on this product, as the listing shows it
    This product · photo: Sperry
  7. 360-degree rawhide lacingSame

    The Sperry Sperry Top-Sider and this product both have a lace running around the whole collar and tying at the instep.

    A rawhide (untanned leather) lace runs through eyelets around the whole collar, wraps the heel and ties at the front, so the shoe can be pulled snug and stays on when wet. Sperry trademarks it as 360° Lacing; Sebago calls it a 360° rawhide lace system and Quoddy a full perimeter lacing system.

    No clear view
    Sperry Sperry Top-Sider
    360-degree rawhide lacing on this product, as the listing shows it
    This product · photo: Sperry
  8. Two- or three-eyelet frontSame

    The Sperry Sperry Top-Sider and this product both have a two-eyelet front.

    The front closure has two eyelets on Sperry's reference Authentic Original 2-Eye; Sperry also sells a 3-Eye version, Timberland's "Authentic" boat shoe has three, and Quoddy's Quoddy Head laces "with triple eyelets". Which count the 1935 shoe had is not stated by any source opened; Sperry's own site separately dates a three-eye Captain's Oxford to 1935 as "the first casual shoe designed by Paul Sperry".

    No clear view
    Sperry Sperry Top-Sider
    Two- or three-eyelet front on this product, as the listing shows it
    This product · photo: Sperry
  9. Low profile, flat heelDiffers

    The Sperry Sperry Top-Sider has a low profile on a thin sole with a flat heel; this product has a separate raised heel.

    Cut below the ankle on a thin sole with little or no heel, so the foot sits close to the deck.

    No clear view
    Sperry Sperry Top-Sider
    Low profile, flat heel on this product, as the listing shows it
    This product · photo: Sperry

Construction

Expected at this price2 detailsWhat a boat shoe should state
Stated by the listing0 of 2Nothing on seams, tacks or finishing
What it does saySuedeand siping and 360; no construction claims

A well-made Boat shoe usually has cemented construction, blake stitch; the listing does not say. Silence is not a verdict: a maker that does these things usually says so, and each can be checked in a minute with the product in hand.

  1. Cemented construction

    Listing: not stated

    A shoe construction in which the outsole is glued to the lasted upper, or in vulcanised shoes bonded by heat and rubber foxing, with no stitching holding the sole on.

    What it tells you

    The cheapest and lightest construction and the norm for trainers, most casual shoes and much of the mid-market. The sole generally cannot be replaced, so the shoe's life is the sole's life; a cobbler can sometimes re-glue a lifting sole. Flexible from the first wear.

    How to check it yourself

    No stitches on the sole edge or inside the shoe; the sole meets the upper in a clean glued line, often with a thin rubber or leather rand. A vulcanised shoe shows a rubber foxing strip around the lower edge.

  2. Blake stitch

    Listing: not stated

    A shoe construction in which the upper is wrapped under the insole and the outsole is stitched directly through insole and upper from inside the shoe, with no welt.

    What it tells you

    Lighter, more flexible and closer-cut than a Goodyear welt, which is why Italian makers favour it for loafers and dress shoes. It can be resoled, but only on a Blake machine and a limited number of times, and the through-stitch can let water in. Blake/Rapid adds a midsole and a second outside stitch for durability.

    How to check it yourself

    Lift the insole or sock liner: a row of stitches runs around the inside of the shoe. The sole edge shows no welt strip and usually no visible stitch on top, only on the bottom.

Composition and materials

The listing does not state a fibre composition.

Not stated in the listing
  • Fibre composition
  • Country of origin